DWTP01/E1424

DWTP01/E1424

Digital Plug-on Transmitter

The DWT-P01/E1424 digital plug-on transmitter operates within a 72 MHz range, from 470 to 542 MHz. Audio input is selectable from either mic or line level. The DWT-P01/E provides a choice of 1, 10 or 50 mW RF output. The transmitter operates for approximately 5 hours using two AA size alkaline batteries at 10 mW output power. The DWT-P01/E supports use of alkaline, lithium, or nickel-metal hydride batteries. Transmitter functions; including input attenuator, RF frequency selection, RF power output, Audio LCF frequency and a power sleep mode (in the transmitter) can be remotely controlled from the digital wireless receiver. The DWT-P01/E also includes 48V phantom powering.

Highlights:

• Supports mic or line input 

• Audio and metadata transmission operates on UHF-TV channels 14 to 25 (470 to 542 MHz)

• Transmitter settings can be remotely controlled from the digital wireless receiver (using 2.4 GHz IEEE802.15.4 communication technology)

• Compact, lightweight and built with a sturdy die-cast magnesium body

• 5 hr battery life using two AA alkaline batteries @ 10 mW power setting

• Selectable output power 1/10/50 mW

General Specifications	Detail:
Battery Life	Approximately 5 hr at 10 mW output using alkaline batteries
Compatibility	For use with DWX Series wireless products operating on the same frequencies
Dimensions	1 3/4" x 1 3/4" x 4 1/2"
Power Requirements	DC 3.0V, (two AA size batteries)
Weight	9 oz (including batteries)

Plug On Transmitter Specifications	Detail:
Audio Input Connector	XLR-3, female
Audio Input Level	Max. -22 dBu (with 0 dB attenuator) Mic; +24dBu Line
Carrier Frequencies	566 to 607 MHz (TV channels 30 to 36) and 615 to 638 MHz (TV channels 38 to 41)
Oscillator	Crystal controlled PLL synthesizer
Pilot Tone Signal	-
RF Power Output	1 mW / 10 mW / 50 mW
Type Of Emission	G1E or G1D