DWTB01/E1424


DWTB01/E1424

Digital Body-pack Transmitter

The DWT-B01 digital body-pack transmitter is compact, lightweight and built with a sturdy die-cast magnesium body. The /1424 model operates within a 72 MHz range, from 470 to 542 MHz. Audio input is selectable from either mic or line level. The DWT-B01 provides a choice of 1, 10 or 50 mW RF output. The transmitter operates for approximately 5 hours using two AA size alkaline batteries at 10 mW output power. The DWT-B01 supports use of alkaline, lithium, or nickel-metal hydride batteries. Transmitter functions; including input attenuator, RF frequency selection, RF power output, Audio LCF frequency and a power sleep mode (in the transmitter) can be remotely controlled from the digital wireless receiver.

Highlights:

  • Supports mic or line input 
  • Requires selection of ECM-77BC/9X or ECM-FT5BC for omni-directional lavalier microphone use
  • Audio and metadata transmission operates on UHF-TV channels 14 to 25 (470 to 542 MHz)
  • Transmitter settings can be remotely controlled from the digital wireless receiver (using 2.4 GHz IEEE802.15.4 communication technology)
  • Compact, lightweight and built with a sturdy die-cast magnesium body
  • 5 hr battery life using two AA alkaline batteries @ 10 mW power setting
  • 6 1/2 hr battery life using two AA nickel-metal hydride batteries @ 10 mW power setting
  • 12 1/2 hr battery life using two AA lithium batteries @ 10 mW power setting
  • Selectable output power 1/10/50 mW


Bodypack Transmitter Specifications Detail:
Audio Input Connector Sony SMC9-4S type
Audio Input Level Max. -22 dBu (with 0 dB attenuator) Mic; +24dBu Line
Carrier Frequencies 470 to 542 MHz (TV Channels 14 to 25)
Oscillator                                                           Crystal controlled PLL synthesizer
Pilot Tone Signal -
RF Power Output 1 mW / 10 mW / 50 mW
Type Of Emission G1E or G1D
General Specifications Detail:
Battery Life Approximately 5 hr at 10 mW output using alkaline batteries
Compatibility                                                    For use with DWX Series wireless products operating on the same frequencies
Dimensions "2 1/2" x 2 7/8" x 11/16""
Power Requirements DC 3.0V, (two AA size batteries)
Weight 4 oz (including batteries)

Labels: , , ,