DWTB01/E3040


DWTB01/E3040

Digital Body-pack Transmitter

The DWT-B01 digital body-pack transmitter is compact, lightweight and built with a sturdy die-cast magnesium body. The /3040 model operates within a 66 MHz range, from 566 to 608 MHz, and from 614 to 638 MHz. Audio input is selectable from either mic or line level. The DWT-B01 provides a choice of 1, 10 or 50 mW RF output. The transmitter operates for approximately 5 hours using two AA size alkaline batteries at 10 mW output power. The DWT-B01 supports use of alkaline, lithium, or nickel-metal hydride batteries. Transmitter functions; including input attenuator, RF frequency selection, RF power output, Audio LCF frequency and a power sleep mode (in the transmitter) can be remotely controlled from the digital wireless receiver.

Highlights:

  • Supports mic or line input
  • Requires selection of ECM-77BC/9X or ECM-FT5BC for omni-directional lavalier microphone use
  • Audio and metadata transmission operates on UHF-TV channels 30-40 (566 MHz to 607 MHz and from 615 MHz to 638 MHz)
  • Transmitter settings can be remotely controlled from the digital wireless receiver (using 2.4 GHz IEEE802.15.4 communication technology)
  • Compact, lightweight and built with a sturdy die-cast magnesium body
  • 5 hr battery life using two AA alkaline batteries @ 10 mW power setting
  • 6 1/2 hr battery life using two AA nickel-metal hydride batteries @ 10 mW power setting
  • 12 1/2 hr battery life using two AA lithium batteries @ 10 mW power setting
  • Selectable output power 1/10/50 mW


Bodypack Transmitter Specifications Detail:
Audio Input Connector Sony SMC9-4S type
Audio Input Level Max. -22 dBu (with 0 dB attenuator) Mic; +24dBu Line
Carrier Frequencies 566 to 607 MHz (TV channels 30 to 36) and 615 to 638 MHz (TV channels 38 to 41)
Oscillator                                                           Crystal controlled PLL synthesizer
Pilot Tone Signal -
RF Power Output 1 mW / 10 mW / 50 mW
Type Of Emission G1E or G1D
General Specifications Detail:
Battery Life Approximately 5 hr at 10 mW output using alkaline batteries
Compatibility For use with DWX Series wireless products operating on the same frequencies
Dimensions                                                        2 1/2" x 2 7/8" x 11/16"
Power Requirements DC 3.0V, (two AA size batteries)
Weight 4 oz (including batteries)

Labels: , , ,